18-inch slab decking 2-panel square

second generation precast deck panel (nudeck) - DigitalCommons .

Second Generation Precast Deck Panel (NUDECK) System. 2. Report Date ... Table 3 Cost of wearing and protection systems for precast deck slabs, $/yd .. spacing between the pockets ranged from 18 to 24 inches; however, there is research .. membrane and asphalt, including grinding is $51 per square yard.

2016 Bridge Cost Data - ODOT FTP

Jan 19, 2017 . . per square foot. The Average Unit Cost for 7 bridge deck overlays was . Structures. P.S. Slabs - 26 inch. 8,218.6. 996,959. $. 121.31. $. 2.

Vulcraft Steel Deck Catalog - NYIT Structural Steel Design

439,440 square feet of Vulcraft 3” composite deck. Developer: Duke . steel decking at six strategically located deck ... 18. 16. Alabama/NewYork. C. P T B. 36. 36. 36. 6.00 3.50 1.75. 36. 36. 36. 36. 6.00 4.25 0.50. NA . 2 inch polyisocyanurate foam insulation for the SDI. VERTICAL ... D. Panel camber and/or sweep shall.

ESR-2047 - EPIC Metals Corporation - ICC-ES

16, 18,. 19, 20 or 22 gage steel [base-metal thicknesses of. 0.0600, 0.0474, 0.0418, 0.0358 or . Epicore: 2-inch-deep (51 mm) floor deck panel with ... 3 Deflection limit of the composite slab is 1/360 of span under total load, which . times the area of concrete above the steel deck but not less than 0.028 square inch per.

PCI Northeast, Full Depth Deck Panels Guidelines - Precast .

Apr 26, 2011 . Normal deck slab concrete may be used; however, this limits the use of . horizontal distance of 18 inch from panel edges and shear connector . 9.7.2 is not applicable to precast deck panels. The design . a squared pattern.

1-1/2" Composite Floor Deck - James River Steel

CAD files on site, varoius slab depths and spans. . 16, 18, 20, 22 Guage . Composite Deck is meant to be used as a floor deck where concrete is to be poured . Max Unshored Clear Span, Superimposed Live Load in Pounds Per Square Foot . 2. Minimum exterior bearing length required is 1.5 inches. Minimum interior.

floor deck design guide - ASC Steel Deck

No Acustadek Option. Lowest composite deck-slab weight per square foot for . Composite deck. 2 inch nominal depth, 36 inch coverage .. Gray cells are based on 1 hour and 2 hour fire ratings with 20 and 18 gauge decks. Panel Features and . panel profile, panel coverage, metallic/paint coating, and any modifiers.

Standard Codes - irccdd

Sills and sleepers on a concrete or masonry slab that is in direct contact with the . Horizontal members such as girders, joists and decking. 2. . lumber less than nominal 1 inch by 5 inches (25.4 mm by 127 mm) or 2 inches by 4 inches (51 ... 7.1. Exposed area of an individual pane greater than 9 square feet (0.836 m2).

Specs - Roof Deck, Inc.

RDI roof decks are available in a range of standard 1-1/2 and 3-inch deep fluted configurations to . structural support for lightweight insulating fills or a form for reinforced structural concrete slabs. . Panel Ends Out of Square: 1/8 inch per foot.

Design Recommendations for Steel Deck Floor Slabs - Scholars' Mine

"composite steel deck floor slab" is applied to systems in which the steel deck has some .. shear span as short as possible, i.e., about 18 inches. Shear spans.

Pds 081 - County of San Diego

on minimum 18-inch-high platform unless listing report number . of 1024 square inches and be able to encompass a 30-inch- . concrete slab-on-grade and the base course or subgrade. .. nails having a minimum length of 1-1/2 inches at each side or . panel fastened to both the top and bottom plates in accordance.

composite steel floor deck - Marlyn Steel Decks, Inc.

2. Materials. 2.1 Composite Steel Decks: Composite steel floor deck shall be fabricated from steel . Panel end out of square: 1/8 inch per foot of panel . slab, it must be designed to last the life of the .. exceed 18 inches (460 mm). Fillet welds.

Composite Steel Floor Deck - Slabs - Steel Deck Institute

0.75. 0.028. 0.71. 20. 0.0358. 0.91. 0.034. 0.86. 18. 0.0474. 1.20. 0.045. 1.14 .. on the contract drawings: “Composite slab shall consist of 2 inch deep G-60 .. Panel end out of square shall not exceed 1/8 inch per foot of panel width (10 mm.

guidelines for deck construction - Village of Howard

area (in square feet) of deck surface carried by each post to arrive at the individual loading per post. .. and driveway aprons. sidewalks, parking lots, paved areas, patio slabs, and all other .. tance and spacing requirements are based on 1/2 inch?diameter fasteners. . must meet the requirements of ANSI/ASME B18.6.1.

CHAPTER 19 CONCRETE | 2014 Florida Building Code | ICC .

For garage floor slabs where a steel trowel finish is used, the total air content required .. of ACI 318 unless modified by Chapter 18 of the Florida Building Code, Building. . (a) Vertical reinforcement of at least 0.20 square inch (129 mm2) in ... concrete other than galvanized G-90 steel deck or structural concrete deck shall.

Deck Framing Connection Guide - Tulalip Tribes

2 | DECK CONNECTION AND FASTENING GUIDE . Simpson Strong-Tie recommends that deck designs are approved by the local building ... See page 18 for more information on . panel sheathing. 1?2" max. ... an area of 4 square inches.

Steel Deck - Canam-Buildings

The original 185,000 square foot facility in South Plainfield, . In addition to the two (2) deck manufacturing facilities, Canam operates four (4) .. Concrete Slabs on Form Deck . 18 inches (8 inches for N deck, 12 inches for J, H, LS decks).

10 Easy-to-Install Decking Tiles | Better Homes & Gardens

Updating your deck or patio is a snap with these easy-to-install decking tiles. . Bonus: These tiles come in eco-friendly, rot-resistant, and cost-efficient options. 2 of 10 . These 18-inch teak tiles create the perfect platform for outdoor dining and . fits over standard 16-inch joists and can support 4,000 pounds per square foot.

Vulcraft Roof Catalog/REV2 - Civil, Environmental and Architectural .

439,440 square feet of Vulcraft 3” composite deck. Developer: Duke ... Test was conducted with 1.5 inches of 1.65 pcf fiberglass insulation on 3 inch EPS Plaza.

Costs for Metal Decking

Item, Rate. 1-1/2"D x18-18 Gauge Galvanized Metal Deck Cellular Steel Panel>1500SF(140M2) 1500SF(140M2)>Detail, $ 6.06 / SF. 1-1/2"D x22-18 Gauge.

Interior Doors at Sutherlands

18 in Camden 2-Panel Arch Molded Hollow Core Door Slab. Mfg.#1/6X6/8 . 30-Inch 6-Panel Left-Handed Molded Hollow Core Prehung Door. Mfg.#2/6X6/8 LH

Interior Doors: Panelled Doors | RONA

METRIE. 6-Panel Textured Slab Door . Lincoln Park 1 Moulded Panel Door - Primed - 30" x 80" . Format 18x80x1 3/8" . 2-Panel Hollow-Core Interior Door.

Corrugated Steel Decking, B Deck - FS Industries

Corrugated Steel Decking, B Deck, Mezzanine Decking, ResinDek, Drill . To order material, specify quantity of pieces, gage, finish, and panel length. To calculate price of special lengths, multiply width (3) x special length (in feet) x price per square foot. . 18, 0.048, 256, 203, 164, 136, 114, 97, 84, 73, 64, 57, 51, 45, 41.

Interior Slab Doors at Menards

70 results . Shop Menards for a wide selection of slab doors that are ready to hang and will . Mastercraft Primed Raised Square 2-Panel Interior Door Only.

deck products - Bushwick Metals

6'-2”. 76. 63. 53. 45. 39. 34. 20. Two. 7'-1”. 92. 76. 64. 54. 47. 41. 36. 32. 18. 8'-4”. 122. 101. 85 .. 1 1/2”. 2 1/2”. 6”. Slab. Max Unshored. Superimposed Live Load in Pounds Per Square Foot .. Panel Length: Plus or minus 1/2 inch (13 mm).

Lumber & Composites | The Home Depot Canada

Products 1 - 48 of 664 . Shop Pressure Treated Lumber by Size - 2 inch x 4 inch . Browse the Home Depot Canada Deck and Fence Inspiration gallery and find.

Product Details

Product List